smallHD 703 BOLT, wireless 7“ HDMI/SDI Monitor mit integriertem Teradek Sidekick II Bildfunk-Empfänger

ultra heller 7″ Fieldmonitor / Directors Monitor, mit integriertem Teradek Sidekick II Receiver, kompatibel zu Teradek Bolt 500/1000/3000 (max. Reichweite 300 Fuß)

 110,00 / Tag
 440,00 / Woche

Lieferumfang

  • 1x smallHD 703 Bolt , 7″ IPS-LCD Videomonitor (1920 x 1080), SDI/HDMI/SidekickII
  • 1x D-Tap Kabel
  • 1x V-Mount Platte
  • 1x Privacy Hood
  • 1x SDI Kabel
  • 1x Anti-Glare Screen Protector
  • 1x Case

<h2>7″ Ultra Bright FullHD Monitor mit eingebautem Teradek Sidekick II Empfänger</h2><!–mep-nl–>Der neue smallHD 703 Bolt Monitor ist ein 7″ IPS LCD FullHD Monitor mit einem eingebauten Teradek Sidekick II Empfänger. Die Empfangsreichweite des Signals beträgt bis zu 91 Meter, optional kann ein zweiter Bolt Empfänger am Monitor angebracht werden, um ein zweites Signal zu überwachen. Die Helligkeit des Monitors beträgt 3000nits, so lässt sich selbst bei starker Sonneneinstrahlung immer noch das Bild mühelos auch ohne Sonnenblende anschauen. Der Sidekick II Empfänger ist kompatibel mit den BOLT 500, BOLT 1000 und BOLT3000 Sendern.<!–mep-nl–><h2>Hauptmerkmale</h2><!–mep-nl–><ul><!–mep-nl–> <!–mep-tab–><li>7″ FullHD Monitor, 1920×1080</li><!–mep-nl–> <!–mep-tab–><li>10-Bit Farbtiefe</li><!–mep-nl–> <!–mep-tab–><li>1150:1 Kontrastverhältnis</li><!–mep-nl–> <!–mep-tab–><li>3000nits</li><!–mep-nl–> <!–mep-tab–><li>2 x SDI Eingänge, 1 x Wireless Eingang</li><!–mep-nl–> <!–mep-tab–><li>1 x SDI Ausgang</li><!–mep-nl–> <!–mep-tab–><li>integrierter Teradek Sidekick II Empfänger mit bis zu 91 Meter Reichweite</li><!–mep-nl–> <!–mep-tab–><li>Kompatibel mit Bolt 500, Bolt 1000 und Bolt 3000 Transmittern</li><!–mep-nl–> <!–mep-tab–><li>2 Monitor Signale können kabellos empfangen werden mit einem optionalem zweiten Bolt Empfänger</li><!–mep-nl–></ul>

Display

Panel Type IPS LCD
Resolution 1920 x 1080
Pixel Density (PPI) 323 ppi
Aspect Ratio 16:9
Active Area 7.02
Brightness 3000
Contrast 1150:1
Color Gamut 100% Rec 709
Color Depth 10-Bit Color Intelligence Engine
Viewing Angle 178 Degrees (CR<10)
Backlight Type White LED

Viewfinder (EVF)

Variable Field of View range

Input Signal Types/Formats

3G-SDI YCC 4:2:2 @ 10-bits: 1080p60, 1080p59.94, 1080p50, 1080i60, 1080i59.94, 1080i50
HD-SDI YCC 4:2:2 @ 10-bits: 1080p30, 1080p29.97, 1080p25, 1080p24, 1080p23.98, 1080psf30, 1080psf29.97, 1080psf25, 1080psf24, 1080psf23.98, 1080i60, 1080i59.94, 1080i50, 720p60, 720p59.94, 720p50, 720p30, 720p29.97, 720p25, 720p24, 720p23.98
SD-SDI YCC 4:2:2 @ 10-bits: 480i29.97, 576i25
Audio SDI – Monitor through Headphone Jack – Metering up to 8 channels

Output Signal Types/Formats

3G-SDI YCC 4:2:2 @ 10-bits: 1080p60, 1080p59.94, 1080p50, 1080i60, 1080i59.94, 1080i50
HD-SDI YCC 4:2:2 @ 10-bits: 1080p30, 1080p29.97, 1080p25, 1080p24, 1080p23.98, 1080psf30, 1080psf29.97, 1080psf25, 1080psf24, 1080psf23.98, 1080i60, 1080i59.94, 1080i50, 720p60, 720p59.94, 720p50, 720p30, 720p29.97, 720p25, 720p24, 720p23.98
SD-SDI YCC 4:2:2 @ 10-bits: 480i29.97, 576i25
Audio SDI – Incoming Audio Stream is sent downstream via SDI connection

Wireless

SDI Ancillary Data Supports transmitting metadata, timecode, and start/stop flags from certain camera manufacturers. Please refer to: https://support.teradek.com/hc/en-us/articles/217446087
Color Sampling For SDI: YCbCr 4:2:2, 10-bit
Supported Resolutions 1080p60/59.94/50/30/29.97/25/24/23.98 1080psf30/29.97/25/24/23.98 1080i60/59.94/50 720p60/59.94/50 480i(NTSC)/576i(PAL)
Video Compression Visually lossless
Audio Compression 48KhZ 24-bit PCM
Switches On/Off
Wireless Network 5GHz (20&40Mhz), DFS Frequencies Available
RF Channel Selection Auto only (NOT configurable)
Encryption AES-128
RF Power 15dBm EIRP
Range Up to 300ft line of sight
Noise Rejection Can coexist with WiFi and 5GHz cordless phones

Connector Type

SDI 2x 3g Input, 1x 3g Output
Audio 1x ⅛” Headphone Jack
Power In 1x Locking LEMO 2-pin Connectors Power Input
USB 1x Proprietary Locking LEMO 5-pin Connectors Power Input

Controls

Primary Control Interface Joystick Navigation, Dedicated Back/Power Button. 5 Additional User Assignable Function Buttons

Data I/O

Storage SD Card for LUTs, Captured Images, Image Overlays, Firmware Upgrades, Profile Saving.
USB USB port supports storage devices for LUTs, Captured Images, Image Overlays, Profile Saving.

Power

Connector Type 1x Locking LEMO 2-pin Connectors Power Input
Voltage With DV Battery Plate: 6.0 – 8.4V 7.2V Nominal With High Voltage Battery Plate: 12 – 34V 14.4V Nominal With Lemo Input: 12 – 34V Max
Power Consumption 16.7W Max Brightness (3K+ nits) w/ Wireless OFF + SDI Video Signal, 7.4W Studio Mode (200 nits) w/Wireless OFF + SDI Video Signal | 23.3W Max Brightness (3K+nits) w/ Wireless ON + Wireless Video Signal/13.8W Studio Mode (200 nits) w/ Wireless ON + Wireless Video Signal
Recommended Power Supply Included: LEMO to D-Tap Cable
Overload Protection Yes

Environmental

Compliance FCC, IC, CE, RoHS
Operating Temperature 0 – 100 degrees F
Storage Temperature -4 – 120 degrees F
Screen Protection AR Coated Gorilla Glass Optical Bonding on Panel
Width 1.21” (3.07cm)
Depth/Length 8.4” (21.34cm)
Weight (Item Only without battery) 32oz (907.18g)
Weight (Packaged) 78oz (2211.26g)
Mount Points 1x ¼”-20 Thread on left and right side of Monitor, 7x ¼”-20 Thread on Bottom of Monitor, 7x ¼”-20 Thread on Top of Monitor
Note: 5-inches high without antennas, 9.0 with antennas

Software

Pixel Zoom (type) 2x & 4x Zoom with smooth pan via joystick
Frame Guides Preset Aspect Ratios & Customizable
DSLR Scale Canon 5DMkii & Canon 7D
Custom Scale Underscan Only
Anamorphic De-Squeeze 1.33x, 1.5x, 1.66x, 2.0x
Image Rotate(Manual/Automatic) Automatic or Manual Control
Image Flip (Manual/Automatic) Automatic or Manual Control
Focus Assist (Colors) User Adjustable Color Style and Intensity
Peaking User Adjustable Intensity
False Color Spectrum, Arri Style and Fully User Customizable
Zebra Dual – User Configurable
Waveform Luma & RGB Style, Fully User Customizable w/ Region of Interest Highlighting
Vectorscope Yes
RGB Parade Fully User Customizable
Histogram Luma & RGB Style
Image Capture With Dedicated Button
Custom LUTS Loadable as Looks on Pages or as Systemwide Color Calibration via the settings menu
LUT Downstream Available on SDI Out. Applied on Output Preview Page.
LUT Import Via SD Card or USB Storage Device
Image Overlay Opacity Slider and Blink Setting
Audio Meters Up to 8 channel

Das könnte Sie auch interessieren…